Description

Buy Genuine Polaris 60° 6 in. Carbide Wear Bars, Part 2879026 in Canada – In Stock

Product Overview: Genuine Polaris 60° 6 in. Carbide Wear Bars (Part 2879026)

Maximize your snowmobile’s trail control, eliminate darting, and ensure razor-sharp cornering bite all winter long with the authentic Polaris 60° 6 in. Carbide Wear Bars (OEM Part 2879026). Engineered specifically to meet demanding factory standards, these high-performance carbide runners bite hard into hard-packed snow, icy corners, and swept trails to give you complete steering confidence.

By replacing worn stock runners with premium 60-degree carbide, you protect your expensive ski bases from abrasive asphalt crossings and gravel wear while dramatically improving handling response. Available directly through PolarisPartCanada.com, this essential maintenance upgrade is a must-have for every serious trail rider.

Compatibility & Fitment

Precision-engineered to match factory ski mounting stud locations for a direct, hassle-free installation:

• Primary Vehicle Compatibility: Custom-designed to fit select genuine Polaris snowmobile skis across trail, crossover, and mountain lineups (verify exact ski and model year compatibility using your owner’s manual or our part finder).

• OEM Part Number: Genuine Polaris Part # 2879026.

• Carbide Specification: 60-degree cutting angle with a 6-inch length of premium hard-faced carbide inlay.

Note on Fitment: Always cross-reference your snowmobile’s ski model and existing mounting stud configuration prior to ordering to ensure correct hole spacing.

How It Works & Functional Engineering

When riding down icy trails, standard steel wear bars quickly round off, causing your sled to push in corners or wander aimlessly (darting).

The Polaris 60° 6 in. Carbide Wear Bars feature a precision-brazed strip of tungsten carbide embedded along the bottom edge. As you turn your handlebars, the aggressive 60-degree carbide profile slices into hard ice and packed snow rather than sliding over it, locking your skis onto your intended line and ensuring predictable, responsive steering control.

Performance Benefits

Equipping your snowmobile skis with genuine Polaris carbide runners delivers immediate on-trail advantages:

• Precision Cornering Bite: Eliminates push and slide in tight, icy corners, giving you maximum confidence at trail speeds.

• Darting Reduction: Tracks straight and true over choppy trail chatter and oncoming sled ruts.

• Extended Ski Life: Acts as a rugged sacrificial barrier, preventing abrasive road crossings, rocks, and ice from chewing up your composite ski bottoms.

• Balanced Steering Effort: Optimized 60-degree angle provides exceptional bite without making steering overly heavy or fatiguing.

Build Quality & Materials

Manufactured to endure high-stress impacts and sub-zero abrasive wear:

• Carbide Inlay: High-grade tungsten carbide powder brazed into a heavy-duty steel matrix for maximum fracture resistance.

• Bar Construction: Hardened structural steel backing bar designed to resist bending when striking hidden trail obstacles.

• Surface Finish: Corrosion-resistant coating to fight rust from road salt slush and wet spring storage.

• Studs: Threaded mounting bolts precision-welded to exact factory pitch for effortless alignment through ski holes.

Installation & Maintenance Instructions

Swap out your worn runners safely in your garage using standard hand tools:

1. Preparation: Safely lift and support the front end of your snowmobile so the skis are off the ground and secure.

2. Removal: Unbolt the retaining nuts from the top side of the ski. Tap the old wear bar down if stuck, and slide it out of the mounting channel.

3. Inspection: Clean out any packed ice, dirt, or debris from the ski groove before installing the new bar.

4. Installation: Guide the threaded studs of the new Part 2879026 carbide bar up through the pre-drilled holes in the ski.

5. Fastening: Secure with lock washers and nuts, tightening evenly to factory torque specs. Check that the bar sits completely flush against the bottom of the ski.

Durability & Canadian Climate Resistance

Built specifically to survive brutal Canadian winters, these carbide bars shrug off extreme sub-zero temperatures without becoming brittle. The tough tungsten matrix resists shattering when striking frozen logs or hidden trail hazards, ensuring dependable performance from early season slush to late spring corn snow.

Trust & Authenticity

When you shop with PolarisPartCanada.com, you are sourcing 100% genuine OEM Polaris hardware and accessories through a trusted Canadian supplier. Enjoy secure online checkout, transparent Canadian pricing with zero hidden border fees, and prompt delivery straight to your door.

Why Choose PolarisPartCanada.com for Part 2879026

• Genuine OEM Polaris parts and accessories built for Canadian climates.

• Competitive, transparent Canadian pricing.

• Fast, reliable nationwide shipping across all provinces and territories.

• Expert customer support from knowledgeable powersports enthusiasts.

• Secure online ordering protected by advanced data encryption.

• High inventory levels minimizing wait times during peak riding seasons.

• Trusted by riders, racers, and utility operators coast to coast.

Fast Delivery Across Canada

We know that trail season moves fast and maintenance can’t wait when a weekend trip is planned. PolarisPartCanada.com maintains stocked inventories and partners with premier courier networks to dispatch your orders without delay.

We proudly ship to Toronto, Montreal, Vancouver, Calgary, Edmonton, Ottawa, Winnipeg, Quebec City, Hamilton, Kitchener, London, Victoria, Halifax, Saskatoon, and Regina, as well as every surrounding rural community across all Canadian provinces and territories. Orders are securely packaged to arrive ready for immediate garage installation.

Genuine Polaris Parts & Gear for Canadian Riders

Maintaining precise steering control on icy Canadian trails requires components engineered specifically for your sled’s front suspension geometry. Relying on cheap, unrated aftermarket runners can lead to broken carbide inserts, poor cornering bite, and premature ski damage miles from the nearest town. Sticking with genuine Polaris OEM accessories ensures your machine handles predictably and safely all winter long.

Frequently Asked Questions

Q: Is this a genuine OEM Polaris part?

A: Yes. Part 2879026 is an authentic OEM Polaris snowmobile accessory supplied directly through factory distribution channels.

Q: How many wear bars are included in this listing?

A: Typically, wear bars are sold individually or as a pair depending on package configuration; please ensure you order two units if you are replacing the runners on both skis.

Q: Do you ship across Canada?

A: Yes. We offer fast shipping to all provinces and territories, ensuring riders in remote and urban hubs alike get their parts on time.

Q: Can dealerships and trade buyers order in bulk?

A: Yes. Commercial, club, and bulk ordering channels are fully supported.

Q: What if I need assistance confirming compatibility with my specific skis?

A: Our customer support team is composed of powersports enthusiasts ready to help you verify part numbers and ski fitment.